Water leaks – the bane of any homeowners existence. It’s not only irritating – the drip drip sound is enough to drive anyone crazy – it’s also wasteful. A leaking faucet can waste gallons of water per day. In fact, a water leak that presents as a leaking faucet can waste up to 350 gallons of water per year. No matter where you live, this is bad news. You might feel the impulse to ignore a water leak. After all, a tiny leak is easy to ignore. However, water leaks do not go away on their own. If left unchecked, they can lead to further damage. There are many types of leaks and some are hard to identify. Read on to learn more about leaks and their causes.
Supply Line Leaks
Supply line leaks are not the same as faucet leaks. In the case of a supply line leak, the actual water supply line that supplies water to your home is compromised. The supply pipe is usually outside of the house, often buried underground. The supply line is connected to the water meter. If you notice that there is water in the water meter, this could be a sign that you have a supply line leak. Another sign of a supply line leak is if there’s water in the ground above where the line is buried. In this case, the leak is likely severe. If you have a supply line leak, do not attempt to fix this yourself. Call in a professional.
If your water pressure is too high, this can put wear and tear on your pipes. Wear and tear can lead to leaks in the supply line, which can get worse if left neglected. A professional plumber can identify the location of the leak and reinforce the area that’s weak. They can also strengthen or replace other areas of pipe that look like they are close to leaking in order to prevent supply line leaks in the future.
Toilet leaks are some of the most common kinds of leaks in the home. They are also among the hardest to identify because they are generally silent. They don’t create the noise that leaks from a faucet can create. Because the leak is going directly into another body of water, these leaks can be hard to see and hear. The best way to identify a leak in your toilet is to listen for a sound coming from the valve in the toilet. If the valve makes a sound while the toilet is not being used, this is an indication of a possible leak.
One way to discern whether there’s a leak in your toilet is to deposit dye tabs into the water in the tank. If the colored water begins to show up in the bowl of the toilet within 15 minutes or so, you likely have a leak on your hands. A professional is the best person to fix this problem. They will be able to replace or adjust valves and lines in your toilet so that the leak ceases to be an issue. Loose or worn out parts of the toilet’s plumbing system are usually to blame for the leak. If valves are diminished or damaged, they are likely the cause of the leak in your system. While this is a repair that is easy for a professional plumber to make, it’s not something that you should try at home. If you do, you may find that you do more damage than good. And you may need to pay for more costly repairs in the long run.
A clogged drain does not just present a problem on the outside. It presents a problem on the inside, as well. A clogged drain in the sink makes it difficult for water to flow through the pipes. This can lead to internal blockages that put stress on your plumbing system, eventually leading to breaks or cracks in the pipes if left unchecked. If you notice that water is draining more slowly than usual, have your plumber check for clogged pipes. Doing this can help prevent or identify leaks in the plumbing system.
If the joints that connect your piping are weak or loose, they can cause a water leak to occur in your home. When you have your pipes inspected, make sure that your plumber looks to see if the joints are in good condition. If they aren’t, they may need to be replaced or repaired. One indication of possible weak joints is a banging noise when water is in use. If you are accustomed to hearing this noise, it might be time for an inspection.
If your pipes are made of metal, they should be checked periodically for rust or corrosion. Over time, metal can be worn down and can develop areas of weakness or breakage. If pipes are rusted, there is an increased risk of a water leak.
As with all things, pipes are affected by extreme temperatures. If temperature fluctuates wildly from hot to cold, this can cause undue wear and tear on your plumbing. This can lead to a water leak. Keep this in mind if you are experiencing severe weather conditions. It might be a good idea to have your plumbing inspected after a particularly extreme spell of weather just to make sure that everything is in good working order.
The damage that can be caused by a water leak goes far beyond inconvenience. Mold growth, structural damage, and electrical danger are all potential results of a water leak that goes unchecked. It’s important to know about the causes of leaks in order to prevent them.
If you notice or suspect a water leak, contact us. At Palo Alto Plumbing, we have the knowledge and expertise to do the job right the first time – every time. Contact us today by calling 650-374-0868. We look forward to hearing from you.